Acti 9 - low level auxiliary contact OF+SD - for C60, C120, C60H-DC, DPN, ID.jpg@3652
Acti 9 - low level auxiliary contact OF+SD - for C60, C120, C60H-DC, DPN, ID.jpg@3652

Acti 9 - low level auxiliary contact OF+SD - for C60, C120, C60H-DC, DPN, ID

This Acti9 OF+SD24 electrical auxiliary is a double open/close or fault indicator contact.

Shreelight Power Private Limited

Hotline 24/7 :

(+91) 8849951310

This Acti9 OF+SD24 electrical auxiliary is a double open/close or fault indicator contact. It is dedicated to iD, C60, C120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC, C120NA-DC It reports also the electrical fault, actuation of the tripping auxiliary, open or closed position of the associated device informations to a programmable logic controller. Remote indication of position and tripping upon a fault of the associated device. The 2 contacts (1NO + 1NC) can report the signalling information of the associated device to the Acti9 Smartlink. The width in 9mm pitches is 1. It is a ComReady device. There is a Test function on the toggle. The Ue rated operational voltage is 24VDC. The In rated operational current is 2mA (mini) up to 100 mA (maxi). The operating temperature is -25°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1. and IEC/EN 60947-5-4 standards.

Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Guide to assessing product sustainability is a white paper that clarifies global eco-label standards and how to interpret environmental declarations.

range of product Acti9
Product or component type OC and fault contact
Device short name OF+SD 24
Device application For Smartlink interface
Signal contacts composition 1 NO + 1 NC
[In] rated current DC-12 2…100 mA at 24 V, DC +/- 20 %
9 mm pitches 1
[Ui] rated insulation voltage 500 V conforming to IEC 60664-1
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60664-1
Local signalling Mechanical indicator
Mounting mode Fixed
Mounting support DIN rail
Comb busbar and distribution block compatibility Bottom: YES
Height 85.5 mm
Width 9 mm
Depth 73.5 mm
Product weight 28 g
Colour White
Electrical durability 20000 cycles conforming to IEC 60947-5-4
Connections - terminals Spring-loaded terminal Ti24 (top) 1 cable(s) 0.5…1.5 mm² - rigid Spring-loaded terminal Ti24 (top) 1 cable(s) 0.5…1.5 mm² - flexible
Wire stripping length 10 mm